Innokin Prism T20'S 0.8ohm Coils - 5 Pack - Wick Addiction

Innokin Prism T20'S 0.8ohm Coils - 5 Pack

£11.00 £11.00 Sale

Innokin Prism T20S / Prism S Replacement Coils (5-Pack)
Take your vaping performance to the next level with the authentic Innokin Prism T20S Replacement Coils. Officially known as the Prism S coil system, these high-performance atomizers are specifically engineered to sustain a higher operating limit than previous Endura platforms. Capable of driving a peak throughput of 18W maximum output power and 6A maximum output current, the Prism S system is the ultimate upgrade for vapers seeking a rich, warm, and satisfyingly dense vaping experience.
Featured Variant: The Prism S 0.8ohm RDL Core
The standout choice in the Prism S lineup is the 0.48ohm / 0.8ohm RDL Core. Built using premium, mid-gauge Kanthal round-wire, it operates perfectly within an optimal range of 16W to 18W. This specific configuration is custom-tailored for a smooth, Warm, Semi-Restricted Direct-Lung (RDL) draw. It delivers a perfect balance of intense flavor clarity and increased vapor production that standard Mouth-to-Lung setups simply cannot match.
Advanced Hydrostatic Pressure Regulation

The primary differentiator of the Prism T20S platform is how it handles pressure differentials within the tank reservoir. Traditional vape tanks utilize a static internal column where liquid sits at equalized ambient atmospheric pressure. The Prism S coil housing acts as a dynamic Hydrostatic Regulator, featuring two advanced engineering systems:
  • The Anti-Flooding Chamber: When you take a puff, the negative pressure (suction) draws air through the bottom air paths while simultaneously pulling e-liquid into the large, low-positioned intake slots. Innokin engineered the exact compression density of the internal cotton to resist this vacuum force. This delicate balancing act ensures that juice enters the heating zone only at the exact volumetric rate it is being vaporized, completely preventing the gurgling, spitting, or flooding common in standard designs.
  • The Condensation Capture System: The upper lip of the stainless steel coil housing features a precision-tapered rim. This rim forms a tight friction fit with the tank's chimney column. Any vapor that liquefies and trickles back down the chimney is caught by this bevel and funnelled directly back onto the outer wicking layer, rather than collecting in the base or flooding the air intake channel.
Innovative Threadless Floating Deck
One of the most important reliability features of the Prism T20S coil is its Threadless Floating Deck. Standard vape coils screw directly into the base of the tank, creating a major failure point if juice leaks into the threads and causes oxidation, which alters the device's electrical resistance readings.
Innokin has completely isolated the electrical deck to eliminate this issue entirely:
  • Isolated Circuit Architecture: The lower half of the Prism S coil features an integrated gold-plated positive pin separated from the stainless steel outer negative housing by a high-temperature silicone insulator ring.
  • Mechanical Compression Fit: When you push the coil into the tank, it drops through a precision-machined keyway. Tightening the bottom tank base cap creates a purely mechanical compression fit, pressing the coil's built-in pin directly against the battery’s contact plate. This creates a clean, unoxidized circuit with every single coil change, completely eliminating firing errors or unstable resistance readings.
Technical Specifications:
  • Resistance: 0.8ohm
  • Wire Material: Mid-Gauge Kanthal Round-Wire
  • Operational Range: 16W – 18W (Max 6A current throughput)
  • Wicking Architecture: Hydrostatic Pressure-Balanced Organic Cotton
  • Connection Style: Thread less Floating Deck with Gold-Plated Contact Pin
  • Pack Size: Supplied in a genuine pack of 5 blister-sealed replacement coils
⚠️ COIL PRIMING NOTICE: Because these vertical coils utilize a large column of organic cotton, proper priming is mandatory. Drip 3–4 drops of juice directly into the top centre bore of the coil before installing it. Once the tank is reassembled and filled, let it sit completely undisturbed for 10 to 15 minutes to ensure the core is fully saturated before firing.