Geekvape Supermesh Coils - X1 & X2 Options - Wick Addiction

Geekvape Supermesh Coils - X1 & X2 Options

£14.00 Sale

GeekVape Supermesh X1 & X2 Replacement Coils (5-Pack)
Take your sub-ohm setup to the next level with the authentic GeekVape Supermesh Replacement Coil series. Originally designed to power iconic kits like the GeekVape Aegis Solo and Aegis Mini, these heavy-duty atomizers are celebrated for producing incredibly dense clouds and highly accurate flavor profiles. Built with precision-engineered mesh heating grids and premium wicking materials, these coils are optimized for an exceptional Direct-to-Lung (DTL) vaping experience when paired with high-VG e-liquids, such as 70/30 shortfills.
Thermal Mass and Advanced Coil Geometry
The core engine of the Supermesh series utilizes an expertly engineered Kanthal A1 (KA1) micro-strip. Instead of using traditional wire strands wound into a standard helix, GeekVape chemically etches a solid metal sheet into a repeating hexagonal grid. This structure introduces premium thermodynamic properties to your tank:
  • Ultra-Low Ramp-Up Time: By reducing the total metal mass while vastly expanding the physical surface area, the heating grid possesses almost zero thermal inertia. When your mod fires power through the system, the element reaches peak vaporization temperature almost instantly.
  • Rapid Cooling Phase: The moment you release your device's firing button, the low mass allows the element to cool down immediately. This prevents residual heat from "cooking" your juice inside the tank between puffs, which is the primary cause of early caramelization and cotton degradation.
Choosing Your Supermesh Performance Profile
The Supermesh family utilizes a highly standardized threaded geometric frame colloquially known in the industry as the "Baby Beast" coil form factor. This universal chassis layout makes these coils cross-compatible with a massive collection of sub-ohm tanks across multiple brands.
  • Supermesh X2 0.4ohm Mesh Coil:
    • Performance Details: Precision-calibrated for an optimal output between 30W and 45W (can scale between 30W and 90W depending on preference).
    • Airflow Architecture: Features a precision-machined 3.8mm cylindrical vertical bore. This internal diameter serves as an intentional choke point. As incoming air rises from the bottom airflow slots, its velocity accelerates up this central column, stripping vaporized e-liquid cleanly away from the cotton face for a highly consistent, smooth, and dense draw profile.
  • Supermesh X1 0.2ohm Mesh Coil:
    • Performance Details: Precision-calibrated for high-power sub-ohm vaping, operating at its absolute peak between 60W and 80W (can scale between 30W and 90W depending on preference).
    • Airflow Architecture: Features a significantly wider 4.2mm internal chimney bore. This expanded configuration reduces static vacuum inside the tank reservoir, requiring far less suction pressure to pull air through the system. This massive rush of passing air instantly evacuates vapor droplets away from the wicking face, naturally cooling the metal grid to throw massive, warm DTL clouds.
High-Density Japanese Cotton & Leak Prevention
Every Supermesh coil is packed internally with premium, unbleached Japanese organic cotton, where the fibers are strictly aligned in a parallel vertical weave running along the mesh plate. This layout creates high hydrostatic tension. When your tank is completely full, the high density of the vertical cotton weave holds the e-liquid back using capillary force, preventing fluid from overwhelming the chamber.
  • Why 50/50 E-Liquids Fail: Because these coils are designed exclusively for high-thickness fluids (70% VG / 30% PG shortfills or higher), thin e-liquids like 50/50 nicotine salts or high-PG juices should be strictly avoided. The surface tension of thin liquid is too weak to resist the capillary pull, causing it to break through the cotton barrier and flood the center chimney—resulting in heavy gurgling, spit-back, and leaking from the bottom airflow slots.
  • Mechanical Hardware Isolation: To ensure complete leak protection, the stainless steel chassis features dual-gasket isolation. A clear silicone O-ring sits directly above the base threads, while a thick black nitrile gasket seals the upper rim, completely isolating the liquid reservoir from the lower airflow chamber.
Universal Hardware Cross-Compatibility
Thanks to the standardized thread pitch (M12x0.5) and physical height of the "Baby Beast" chassis, these coils fit seamlessly into a vast range of sub-ohm tanks:
  • Official GeekVape Tanks: Cerberus Tank (commonly bundled with the Aegis Mini, Aegis Solo, and Nova kits), Aero Tank / Aero Mesh Tank (frequently paired with the Blade Kit), and the legacy Shield Tank.
  • Cross-Brand Compatibility: Directly fits the SMOK TFV8 Baby, TFV8 Big Baby, and TFV12 Baby Prince; the Vaporesso NRG, NRG SE, SKRR-S Mini, and Cascade Baby (with GT adapter); the Eleaf Ello Series (Ello, S, T, Duro, Vate); and the Hellvape Fat Rabbit Sub-Ohm Tank.
Technical Specifications:
  • Resistances Available: 0.2ohm (X1) or 0.4ohm (X2)
  • Heating Element: Kanthal A1 (KA1) Hexagonal Mesh Strip
  • Wicking Material: 100% Dense Japanese Organic Cotton (Vertical Weave)
  • Chassis Form Factor: Universal M12x0.5 Threaded "Baby Beast" Core
  • Vaping Style: Direct-to-Lung (DTL)
  • Pack Size: Supplied in a genuine pack of 5 blister-sealed replacement coils
⚠️ COIL PRIMING NOTICE: Because these vertical sub-ohm coils utilize a large column of dense organic wicking material, proper priming is mandatory. Drip 3–4 drops of juice directly into the top centre bore of the coil before installing it. Once the tank is reassembled and filled, let it sit completely undisturbed for 10 to 15 minutes to ensure the core is fully saturated before firing.